Controls the wow & flutter speed in hertz (Hz).
Speed is active when Rate Mode is set to Hz.
Sets the wow & flutter speed based on musical note durations, ranging from a whole note: 1, to a thirty-second note: 1/32.
The Note control supports clicking, dragging, and the arrow keys. Use Shift + ← or → to “lock” the current row when changing notes.
Adjusts the depth of the wow & flutter modulation.
0% is no modulation
100% is maximum modulation.
The maximum depth is set by Amount Multiplier.
Controls the amount of analog-modeled coloration of the frequency spectrum.
At 0%, the frequency response is perfectly flat. At 100%, the frequency response matches the real-world response of the modeled tape machine. At settings above 100%, the response is intensified, and the analog model exhibits slightly higher noise levels.
Controls the amount of analog-modeled saturation.
At 0%, no distortion or saturation occurs. At 100%, the distortion matches the real-world response of the modeled tape machine. At settings above 100%, the distortion is greatly intensified.
Analog Saturation includes a level meter embedded in the slider. This meter shows the peak level of the signal after the Color and Saturation have been applied.
If the signal peak exceeds or equals 0.0dB the meter color turns darker red, indicating that clipping could occur. Wow Control will never clip internally, due to its double-precision floating-point processing, but the signal might be clipped at a later stage (by the host/DAW or DAC).
Selects the analog tape model used for the entire Analog section.
Reel-to-reel machine running at 15 inches per second (ips). The most “hi-fi” Analog Mode in Wow Control. Strong 3rd-order harmonics and a beefy low end.
Reel-to-reel machine running at 7.5 inches per second (ips). Strong 3rd and 2nd-order harmonics and a rounder sound.
4-track cassette machine running at 1⅞ inches per second (ips). Significant saturation with strong 3rd-order harmonics, particularly in the low end.
At their default settings, each Analog Mode produces some noise. To adjust the noise level, use the advanced Analog Noise Gain control.
Tape Model Specifications
|Type||Freq. Response||SNR (A-Weighted)|
|15 Inches-Per-Second||20Hz – 20kHz (±3dB)||-68 dB|
|7.5 Inches-Per-Second||18Hz – 13kHz (±3dB)||-67 dB|
|Cassette||24Hz – 10 kHz (±3dB)||-61 dB|